Conductive Tube-1
This conductive rod is a critical core component of the ±1100 kV DC epoxy‑core SF6 gas‑filled composite insulated wall bushing used in ultra‑high‑voltage direct current transmission projects.
Category:
Conductors
Keywords:
conductive
composite
transmission
Consult Now
Product Description
Name: Conductive Tube
Material: Red Copper
Overall dimensions: Φ300×7100
Welded assembly; welds must be gas-tight at 0.5 MPa; straightness ≤ 2 mm.
This conductive rod is a critical core component of the ±1100 kV DC epoxy‑core, SF6‑gas‑filled composite insulating wall bushing used in ultra‑high‑voltage direct current transmission projects. The rod is manufactured from superconducting purple copper, with a flange diameter of 700 mm, a length of 18.8 meters, and a weight exceeding 3 tons; its overall straightness tolerance is required to be within 3 mm.
Previous page
Next page
Previous page
Next page
This conductive rod is a critical core component of the ±1100 kV DC epoxy‑core SF6 gas‑filled composite insulated wall bushing used in ultra‑high‑voltage direct current transmission projects.
This conductive rod is a critical core component of the ±1100 kV DC epoxy‑core SF6 gas‑filled composite insulated wall bushing used in ultra‑high‑voltage direct current transmission projects.
For the 550 kV voltage level, welded assemblies are used, with a gas-tightness requirement of 0.5 MPa and a hydrostatic pressure requirement of 0.85 MPa.
For the 252 kV voltage level, welded assemblies are used, with a weld‑seal integrity requirement of 0.58 MPa and a hydrostatic pressure test requirement of 0.94 MPa.
Consult Now
If you are interested in our products, please leave your email address, and we will contact you as soon as possible. Thank you!